Lead clamp for ADSS tower ‌ is a kind of golden tool for fixing ADSS optical cable on the tower, mainly used for fixing installation of optical cable lead down and jump. It is suitable for cables of different cable diameters, which can ensure that the cable is fixed firmly on the tower, avoid the cable shaking and wear, so as to protect the normal operation of the cable.

Features and functions

Wide application: suitable for ADSS cable of different diameters, easy and reliable installation, wide adjustable range.
Material selection: The tower fixture is made of hot-dip galvanized steel plate, and the rod hoop is made of stainless steel to ensure the durability and stability of the fixture.
Fixing effect: Install a set of cable guide clip every 1.5-2.0 meters to ensure that the cable will not shake or wear under wind.
Lead clamp for ADSS tower is used to fix ADSS cable on the tower lead down clamp, mainly used for cable lead down and jump fixed. ‌

The specific functions

Fixing the optical cable: When the optical cable is led from the clamp to the installation place of the protection box at the optical cable connector bar (tower), the cable is fixed by the lower guide clip. At the same time, when the cable is led down from the pole and tower to the underground pipeline, cable trench, direct buried, or into the equipment room, you also need to use the cable guide clamp to fix .
Protect the optical cable: by fixing the optical cable to avoid damage caused by friction between the optical cable and the pole or other objects under the action of wind, to protect the safety and normal operation of the optical cable. ‌
In addition, the ADSS tower lead clamp is usually installed every 1.5 meters or so to adapt to different environmental and engineering needs. In harsh environments, the total amount of tension clamp can also be appropriately adjusted to enhance the fixing effect.
The specifications and models of ADSS tower lead clamp are various, which can meet the needs of different projects. In the selection, the cable diameter, use environment and specific engineering requirements should be considered to ensure the applicability and reliability of the downline clamp.