Anyone who has worked on power line construction knows what a hassle installing traditional tension clamps can be. You need a mountain of tools - hydraulic presses, compression sleeves, wrenches, torque meters - and just getting ready takes half the day. Worst of all, working at heights is already challenging; hauling a hydraulic press weighing tens of kilograms up the tower is exhausting just to think about.
Pre-formed double tension clamps are a different story. Their standout feature is simple: they are installed by hand. No hydraulic presses or specialized tools are needed; a single worker can handle the job.
Just how much faster is it?
Estimates suggest construction efficiency improves by over 50%, with even greater advantages in complex environments like mountainous terrain or high-altitude sites. In my view, that figure might actually be conservative. The time saved goes beyond just skipping the hydraulic press step; it also includes:
No hauling tools around. Previously, moving hydraulic presses, compression sleeves, and accessories from the warehouse to the tower base - and then hoisting them up - took a significant amount of time. With pre-formed clamps? A worker simply tucks a pack of pre-formed rods and a few connectors into a tool pouch and climbs the tower.
No repeated adjustments. A technician once shared his experience reinforcing an optical cable in the Moganshan area of Huzhou. The slope was steep and obstructed by trees; with traditional clamps, he had to adjust the sag three times to meet standards, leaving his hands sore. Switching to a pre-formed straight-through tension assembly changed the process to "slip it on, twist the rods tight, hang it on the tower - three steps and it's done."
Work can continue in the rain. Traditional hydraulic compression is sensitive to weather conditions, making it hard to guarantee quality during rain. Pre-formed clamps rely on manual installation and won't slip in the rain; in fact, the more tension applied, the tighter the rods grip.

Even better, quality inspections are faster, too.
With traditional compression clamps, it's impossible to tell by eye if the installation is sound; you need X-ray testing or specialized instruments. Pre-formed clamps are different. Once installed, you can visually check if the color codes align and the gaps between the rods are uniform. No specialized training is required - one glance tells you if the job was done right. Ultimately, the speed advantage of pre-formed double-tension clamps stems not merely from eliminating the need for a hydraulic press, but from streamlining the entire workflow - from transport and installation to final inspection. When dealing with emergency repairs or jobs in complex terrain, the time saved can make the difference between completing the work in a single day versus dragging it out overnight.

