U-shackles, as core connecting fittings in fiber optic cable installation, directly impact line stability, service life, and construction safety. Different types of fiber optic cables have varying structural characteristics, load-bearing requirements, and application environments, requiring specific matching of U-shackle materials, models, and structural designs. The core selection logic revolves around three principles: "compatibility, load-bearing matching, and environmental adaptability."
For ADSS (All-Dielectric Self-Supporting) fiber optic cables, the key features are the absence of metal conductors, light weight, and the need for insulation. They are often used in high-voltage transmission line corridors. When selecting U-shackles, prioritize insulating materials, such as glass fiber reinforced UV-resistant thermoplastic materials or insulated coated alloy steel, to prevent corona discharge and ensure transmission safety. The model should match the cable outer diameter (commonly 8-14mm), selecting small, lightweight shackles to ensure precise fit with pre-formed tension clamps. The rated breaking strength of the shackle should be at least 1.5 times the rated breaking strength of the cable to prevent insufficient load-bearing capacity leading to line failure.
OPGW (Optical Ground Wire) cables combine communication and lightning protection functions, containing a metal reinforcing core and bearing heavy loads. They are often used in backbone transmission lines. Selection should focus on high strength and corrosion resistance. Prioritize high-strength alloy steel forged U-shackles with hot-dip galvanizing and passivation double anti-corrosion treatment to withstand outdoor wind, rain, and electrochemical corrosion caused by lightning strikes. The model should match the rated breaking strength of the OPGW cable (usually 20-50kN), selecting US standard G2130 or Chinese standard Grade 6 or higher high-load models. Ensure the connection gap between the shackle pin and the U-shaped body is ≤0.5mm to prevent cable movement and wear under wind load.

Ordinary overhead fiber optic cables (such as GYTA and GYTS types) have a simple structure and lower cost, and are mostly used in low-voltage or non-high-voltage environments such as metropolitan area networks and rural communications. Selection can focus on cost-effectiveness, prioritizing hot-dip galvanized precision cast steel U-shackles to meet basic anti-corrosion requirements. The model of the shackle is selected based on the outer diameter of the fiber optic cable (commonly 10-18mm) and the installation method. Standard shackles can be used for straight pole installations, while terminal poles or corners, due to concentrated stress, require anti-loosening shackles with locking nuts to prevent the cross pin from loosening. The rated load capacity must match the combined weight of the fiber optic cable and the wind load.
For special environments, additional considerations are necessary for fiber optic cable selection. For example, in coastal areas with high salt spray, regardless of the fiber optic cable type, 316 stainless steel U-shaped shackles should be used to enhance resistance to salt spray corrosion. In high-cold regions, alloy steel shackles with excellent low-temperature toughness should be selected to prevent brittle fracture at low temperatures. In summary, the selection of U-shaped shackles must be based on the core parameters of the fiber optic cable and precisely matched to the application environment to ensure that the hardware and the fiber optic cable work together to provide protection and guarantee the long-term stable operation of the line.
