The splice closure shall comply with the following requirements:
a) It shall ensure the optical performance of the ADSS fiber optic cables connected to the splice closure.
b) It shall protect the fiber splices from environmental influences.
c) It shall provide housing for the fiber splices and storage space for the excess fiber lengths.
The splice closure shall consist of an outer casing, internal components, sealing elements, and fiber splice protection sleeves.
a) The outer casing of the splice closure should preferably be manufactured from aluminum alloy or stainless steel (non-metallic materials may also be used, subject to the project owner's requirements) and shall be marked with clear identification labels in accordance with the tenderer's specifications.
b) The internal components include a support frame and fiber routing/storage trays. These components are designed to house the fiber splices and store excess fiber lengths (each with a minimum length of 1.6m and a minimum bending radius of 30mm), while also providing clearly identifiable fiber numbering markers and sufficient working space to facilitate future re-splicing operations.
c) The sealing elements are used to seal the splice closure itself as well as the interface between the closure and the ADSS fiber optic cables; either mechanical sealing or heat-shrink sealing methods shall be employed.
d) Fiber splice protection sleeves may utilize either heat-shrinkable or non-heat-shrinkable methods to provide protection for the spliced fibers.

The materials used for the splice closure shall comply with the following requirements:
a) The outer casing of the splice closure should preferably be manufactured from aluminum alloy or stainless steel (non-metallic materials may also be used, subject to the project owner's requirements) and shall be marked with clear identification labels in accordance with the tenderer's specifications.
b) The internal components include a support frame and fiber routing/storage trays. These components are designed to house the fiber splices and store excess fiber lengths (each with a minimum length of 1.6m and a minimum bending radius of 30mm), while also providing clearly identifiable fiber numbering markers and sufficient working space to facilitate future re-splicing operations.
c) The sealing elements are used to seal the splice closure itself as well as the interface between the closure and the ADSS fiber optic cables; either mechanical sealing or heat-shrink sealing methods shall be employed.
d) Fiber splice protection sleeves may utilize either heat-shrinkable or non-heat-shrinkable methods to provide protection for the spliced fibers. The appearance, mechanical properties, sealing performance, re-entry performance, optical properties, and environmental performance of the splice closure shall comply with the requirements of YD/T 814.1.
Fiber optic splices shall be protected against moisture ingress; the application of such protection shall not result in any increase in splice attenuation. Their mechanical and environmental properties shall comply with the requirements of IEC 61073-1 and YD/T 1024.
The service life of the splice closure shall be no less than that of the ADSS optical cable (25 years).
The splice closure may be mounted directly onto poles or towers without the need for measures such as drilling holes into the structures.
