Galvanized UB Clevis is an important component used to connect overhead wire and insulator string, widely used in the power system, to transfer mechanical load, electrical load and protection. The following is a detailed introduction of UB Clevis:

The structure and use of UB hanging board

Structural features: The upper end of the UB Clevis is connected with a long rod bolt and a cross arm, and the bolt bears the stress state of the double shear plane. The lower end of the UB hanging plate is usually a trough connection mode, including single plate type and double plate type. The upper end forms the front and rear rotation axis, the lower part forms the left and right rotation axis, and the two axes form a 90-degree Angle

Main Uses: UB hanging plate is mainly used to connect overhead wire and insulator string, bearing a certain tensile load, suitable for various voltage levels of suspension line clamp first piece of hardware.

The difference between Galvanized UB Clevis and right Angle hanging board

Functional difference: The right Angle plate can change the connection direction by 90°, while the UB Clevis are mainly used to fix and transfer the load, and does not have the function of changing the direction.

Application scenario: UB Clevis are often used in the assembly of overhead jumper string, and right Angle hanging board is more used in places where the connection direction needs to be changed.

Technical specifications of the Galvanized UB Clevis

UB Clevis are available in a variety of models, each with its specific main size, nominal failure load, and weight. For example, the main size of the UB plate of the UB-7 model is 18mm x 16mm, the nominal damage load is 70kN, and the weight is 0.75kg.

Other models, such as UB-10, UB-12, and UB-16, have different parameters to meet the requirements of different application scenarios